Join our newsletter mailing list



Contact Details

Enquiry Form
PO Box 1470
Emerald QLD 4720
Aust.
Ph. (07) 4982 0188
Fax. (07) 4982 4103

Training Centres

Australia
Emerald: 11 Kyle St

China
LanLong Information Services (SIP) Ltd
601 Suxin Tower
88 Jinji Lake Rd.
Suzhou Industrial Park 215021
P. R. China
Zip Code: 215021
Tel: +86-512-6762 6235


Lennon Training Courses Alphabetically Listed

BMA GCM Surface & Underground

Course Id: BMACSU
Length (days): 4
Cost (A$): 775   GST: Included
Notes: Effective 13 October, 2009 the site specific induction for Gregory Site and Crinum Site will be combined and known as the Gregory Crinum Mine (GCM) Induction. Those mineworkers needing to go underground will now require 4 days with Lennon's to cover the theory for Gregory & Crinum, additional BMA Corporate material and Site Familiarisations for both Surface and Underground areas. The BMA Surface induction done by SGS must be done before sitting the GCM Induction. It is a prerequisite. Contact Lennon Training for the Booking Request Form as there continues to be an approval process involving certain Site Personnel.
Dates: 3/2/2010, 3/9/2010, 3/16/2010, 3/23/2010, 3/29/2010, 4/6/2010, 4/13/2010, 4/20/2010, 4/27/2010, 5/4/2010, 5/11/2010, 5/18/2010, 5/25/2010

BMA GCM Surface (Emerald)

Course Id: BMAIE
Length (days): 2
Cost (A$): 387   GST: Included
Notes: Effective 13 October, 2009 the site specific induction for Gregory Site and Crinum Site will be combined and known as the Gregory Crinum Mine (GCM) Induction. Those mineworkers who will be working on surface only, will now require 2 days with Lennon's to cover the theory for Gregory & Crinum, additional BMA Corporate material and Site Familiarisations for Surface areas. The BMA Surface induction done by SGS must be done before sitting the GCM Induction. It is a prerequisite. Contact Lennon Training for the Booking Request Form as there continues to be an approval process involving certain Site Personnel.
Dates: 3/16/2010, 3/17/2010, 3/23/2010, 3/24/2010, 3/29/2010, 4/6/2010, 4/13/2010, 4/20/2010, 4/27/2010, 4/28/2010, 5/4/2010, 5/5/2010, 5/11/2010, 5/18/2010, 5/19/2010, 5/25/2010, 5/26/2010

BMA GCM Surface (Mackay)

Course Id: BMAIM
Length (days): 2
Cost (A$): 387   GST: Included
Notes: Effective 13 October, 2009 the site specific induction for Gregory Site and Crinum Site will be combined and known as the Gregory Crinum Mine (GCM) Induction. Those mineworkers who will be working on surface only, will now require 2 days with Lennon's to cover the theory for Gregory & Crinum, additional BMA Corporate material and Site Familiarisations for Surface areas. The BMA Surface induction done by SGS must be done before sitting the GCM Induction. It is a prerequisite. Contact Lennon Training for the Booking Request Form as there continues to be an approval process involving certain Site Personnel.
Dates: 3/1/2010, 3/8/2010, 3/15/2010, 3/22/2010, 3/29/2010, 4/12/2010, 4/19/2010, 4/27/2010, 5/4/2010, 5/10/2010, 5/17/2010, 5/24/2010, 5/31/2010

G1001, G1008, G1009 (QMS1 S2 S3)

Course Id: Supervisor
Length (days): 2
Cost (A$): 512   GST: Exempt
Notes: This supervisor course, formerly known as QMS123 are three competencies required by all those who are in supervisory positions within the coal mining industry. As of November 2006, the three competencies S1, S2, S3 are known as the coal compentencies MNC.G1001.A Apply the risk management process; MNC.G1008.A Conduct safety and health investigations and MNC.G1009.A Communicate information. This is a two-day course held generally every fortnight on various weekdays. Bookings are essential.
Dates: 3/15/2010, 3/22/2010, 4/21/2010, 4/27/2010, 5/24/2010

Generic Coal Elective Add-On

Course Id: NCUA
Length (days): 1
Cost (A$): 376.5   GST: included
Notes: This one-day course adds on the topics required for Underground Coal and can be offered to those who hold a current Coal Surface Generic Passport.
Dates: 3/10/2010, 3/24/2010, 4/9/2010, 4/14/2010, 5/26/2010, 6/3/2010

Low voltage/CPR Renewal

Course Id: LVCPRR
Length (days): 1
Cost (A$): 290   GST: Included
Notes: This course is delivered approx once each month on behalf of the Australian Red Cross. It is a 6 monthly refresher required by legislation for electricians. Please contact us to confirm the below dates are proceeding as minimum numbers are required.
Dates: 3/31/2010, 4/23/2010

MNC G1002 B Risk

Course Id: MNC G1002
Length (days): 1
Cost (A$): 365   GST: Exempt
Notes: The pre-req for this course are the Supervisor competencies. This course is scheduled approximately every 4-6 weeks and upon sufficient numbers. Register your interested by contacting Emerald on (07) 4982 0188.
Dates: 4/20/2010, 5/18/2010

New Coal Core & Elective (Surf & UG) Induction

Course Id: NCSUI
Length (days): 3
Cost (A$): 745.5   GST: Included
Notes: This course is the introduction to Surface & Underground Coal Mining, it covers several safety topics and is valid for 2 years. It is a three-day course held every week. Bookings are essential as this course has limited numbers as guided by the MI Skills centre (who consult Industry).
Dates: 3/22/2010, 4/7/2010, 4/12/2010, 5/24/2010, 5/31/2010

New Coal Core (Surface) Induction

Course Id: NCSI
Length (days): 2
Cost (A$): 457   GST: Included
Notes: This course is the introduction to Surface Coal Mining, it covers several safety topics and is valid for 2 years. It is a two-day course held every week. Bookings are essential as this course has limited numbers as guided by the MI Skills centre (who consult Industry).
Dates: 3/22/2010, 4/7/2010, 4/12/2010, 4/27/2010, 5/4/2010, 5/24/2010, 5/31/2010

Renewal of Generic Core and Electiv Coal Passports

Course Id: RGCCE
Length (days): 1
Cost (A$): 418   GST: Included
Notes: Every Monday (except public holidays, they are held on the Tuesday of that week). Please contact the office for the costs involved. You can only renew what you hold.
Dates: 3/15/2010, 3/22/2010, 3/29/2010, 4/6/2010, 4/12/2010, 4/19/2010, 4/27/2010, 5/4/2010, 5/10/2010, 5/17/2010, 5/24/2010, 5/31/2010

Renewal of Generic Surface Coal Passport

Course Id: RGCC
Length (days): 1
Cost (A$): 330.55   GST: included
Notes: Held every Monday and most Fridays (except public holidays). You can only renew for Surface if you already hold the MISkills Generic Passport. Please contact the office for conditions to RPL.
Dates: 3/12/2010, 3/15/2010, 3/22/2010, 3/26/2010, 3/29/2010, 4/1/2010, 4/6/2010, 4/12/2010, 4/16/2010, 4/19/2010, 4/23/2010, 4/27/2010, 4/30/2010, 5/4/2010, 5/7/2010, 5/10/2010, 5/14/2010, 5/17/2010, 5/21/2010, 5/24/2010, 5/28/2010, 5/31/2010

Work Safely at Heights

Course Id: MNMG237A
Length (days): 1
Cost (A$): 320   GST: Exempt
Description: This training will cover the critical aspects of the competency MNM.G237.A which include: - knowledge of all procedures, requirements and instructions to work safely at heights appropriate to a site; - implementation of appropriate procedures and techniques for efficient and effective working safely at heights appropriate to a site, while complying with site risk control; - health & safety, environmental, quality & communication requirements. This includes: a. identifying work requirements b. preparing for work c. accessing work area d. performing work at heights e. cleaning up work area
Notes: When deemed competent, participants will be awarded a Statement of Attainment in partial completion of the qualification MNM20106 Certificate II in Metalliferous Mining Operations (Open Cut). THIS COURSE IS SUBJECT TO MINIMUM NUMBERS.
Dates: 3/19/2010
  © Copyright 2006 Lennon Training. All Rights Reserved